• Home
  • About Us
  • Amazon Affiliate Disclaimer
    • Cookie Policy
    • Terms of Use
  • tech and gaming
  • World Tech
  • Sitemap

goto11.net

Tech gear reviews and guide

  • Home
  • About Us
  • Amazon Affiliate Disclaimer
    • Cookie Policy
    • Terms of Use
  • tech and gaming
  • World Tech
  • Sitemap

Root Samsung Galaxy A11 SM-A115F and Install TWRP Recovery

December 16, 2020 by tuio

If you own a Samsung Galaxy A11 SM-A115F smartphone and want to perform root and flash TWRP Recovery 3.4.0 on your device, then you have visited the right site. XDA employee Prolific afaneh92 has released a uniform version of TWRP 3.4 for the Samsung Galaxy S20 series of smartphones. Please note that the TWRP flashing and rooting process will irreversibly disable the KNOX warranty bit, thus voiding the warranty and preventing you from receiving firmware updates, as subsequent OTA updates will be disabled.

If you are an Android enthusiast and want to do TWRP recovery on your beloved device, you have come to the right place. We will soon explain the process of installing TWRP and the rooting of the Samsung Galaxy A11 SM-A115F.

The Samsung Galaxy A11 has the following specifications: Qualcomm SDM450 Snapdragon 450 (11nm) chipset, Cortex-A53 Octa-Core 1.8 GHz processor, Adreno 506 GPU, 6.4-inch display, 100.5 cm2 (~81.6% screen to body ratio), PLS IPS, 720 x 1560 pixels, 19.Aspect ratio 5:9 (Density ~268 ppi), Internal memory/RAM 32GB 2GB RAM, 32GB 3GB RAM, 64GB 3GB RAM, Triple main sensor 13MP, f/1.8, 27mm (wide angle), AF/5MP, f/2.2, 115˚ (ultra wide angle) / 2MP, f/2.4, (depth), 8MP Auto Camera, f/2.0, Li-Po 4000mAh battery, non-removable, 15W fast charge.

The TWRP is characterized by its material design and attractive user interface (UI). If you follow this manual, you can install the latest version of TWRP for the Samsung Galaxy A11 SM-A115F. You can download TWRP Recovery from the links in the example section of this article. Please note that this is an official TWRP recovery and only for the Samsung Galaxy A11 SM-A115F (Confirm the model by going to Settings > Startup). The process described below is only for rooting and installing the TWRP on the Samsung Galaxy A11 SM-A115F, do not test this method on other devices.

If you want to exploit the full potential of your Samsung Galaxy A11 SM-A115F hardware, the most important task is to run and blink the TWRP. Exchange ROMs often have limited and unsupported customization options. If you have a root device and a flash TWRP recovery, you can install all custom ROMs, modules, kernels, Xposed, etc., as well as many applications that need root access to function properly.

READ also how to root HTC Google Pixel XL and install TWRP Repair 3.4.0.

Brief information and benefits of TWRP recovery

The TWRP (Team Win Recovery Project) is an open source community development project. With the flashing TWRP your device can install any firmware, start your smartphone, change zip files for settings, Xposed modules for settings, root and unroot processes in one click. You can also make a full backup of Nandroid and restore it later, flash the image file with a single click, remove bloatware, overclock and underclock. The TWRP allows you to easily erase, cache and delete data after flashing an image file to display changes and correct minor errors caused by caching.

To install the TWRP, your Samsung Galaxy A11 SM-A115F phone must have an unlocked starter charger. This means that you first need to unlock the bootloader to install the root of the device, as well as to perform any configuration.

Disclaimer : While AndroidWeblog.com covers everything very clearly, so that our readers get exactly what they want, there is still a modest chance that the steps mentioned here will cause major problems. It is therefore in the user’s interest to take great care in preventing accidents with the device.

Installing a custom ROM firmware and flashing it will definitely void your device’s warranty and AndroidWeblog.com cannot be held responsible for invalid warranties or limited devices.

Condition

Check the model number, which must be stated:

  • Samsung Galaxy A11 [Models : [SM-A115E] Android 10 A user interface 2.0

You should read the disclaimer carefully before using your phone regularly and agree to continue to take this risk.

The phone must be 70% charged, otherwise complications may occur during the experiment. Why take the risk of trying to fully charge it.

If you’re installing a root of your phone or a custom ROM, it’s good practice to back up your phone. Back up all your media such as photos, videos and everything else on your PC and your contacts in the cloud.

ALWAYS know how to run the Iris 870 and install TWRP Restore.

You need to enable the USB debugging option by going to Settings, Applications, and Developer Options.

Samsung Galaxy A11 SM-A115F Android 10 One UI 2.0Root installer downloads

Download Samsung drivers here (if you already have drivers installed on your PC, ignore this).

Download Odin from here.

Download here the TWRP recovery for the Samsung Galaxy A11 SM-A115F :

TWRP Recovery 3.4.0-1

Galaxy A11 (Snapdragon variations)

Download SuperSU via Chainfire from here.
Download Magisk Manager from here.

Steps to flash/install TWRP on Samsung Galaxy A11 SM-A115F Android 10 One UI 2.0

Step one: First enable USB debugging on your device. To enable USB debugging, simply enter the Developer setting. Go to Settings>About Phone> and type the house number 7-8 times until the message Developer Enabled appears. Once the development options are active, you can return to Settings>Development options>Activate USB Debugging.

Step two: Suppose you have already downloaded the latest Odin and TWRP recovery for your device from the preview area above. If the latest version of Odin does not work on your device or if you have problems, just download the correct version of Odin.

Step three: Make sure you have already downloaded TWRP Recovery for your Samsung device. Just unpack the compressed Odin file on your computer and install the latest Samsung USB drivers on your computer.

Step four: Once the device is turned off, simultaneously press the Power+Volume down+Home keys and the device enters the start-up mode. If this key combination does not work for your device, simply search for this key combination for your device on Google.

Step five. Now connect your Samsung device to your computer using a USB cable. Then navigate to the folder where the Odin files were extracted and right click on the Odin executable file and then click Run as Administrator.

Step six: The interface should display something like ID:COM below, and check the interface below carefully.

An ID:COM

Step seven: Note the ID:COM and the empty field below, which turns blue as soon as the device is detected. The device should be detected when the correct drivers are installed on the computer.

Step 8 : Then just click AP, go to the firmware archive, find the .tar.md5 file and select it after clicking AP.

ALWAYS read how to install Blackview BV7000 Pro in one click without a computer.

Pay attention: There’s a PIT zone in the area. Do not put a file in the PIT section and make sure that redistribution is not enabled. Tick the box and place a check mark next to Auto-Restart and F. Reset Time.

Step 9 : Once the TWRP file (.img) has been uploaded to the AP field, it can blink or start the installation process. Be careful not to touch the USB cable while flashing.

A passageway

Step 10 : If all goes well, you will see a green PASS or RESET message at the end indicating that the TWRP firmware process for your device has been successfully completed and that it now has a TWRP recovery function. At this point, the device will restart automatically, don’t panic, it’s normal. You can now disconnect the device from the computer.

Procedurefor root Samsung Galaxy A11 SM-A115F to Android 10 a 2.0 UI/installation Magisk or SuperSU

Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then go through the steps.

Pay attention: You can use Magisk Manager or Super SU, but only one, so choose well. If you’re not sure, go to Magisk Manager.

Step one: Transfer the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of your Samsung Galaxy A11 SM-A115F smartphone.

Step two: Now all we have to do is start the recovery. You can also back up the ROM via the TWRP interface. However, I recommend making a backup copy of the ROM. Because if the process fails, you can make the ROM blink.

Installing TWRP 3.0

Step three: Press Install and then navigate to SuperSU.zip or magisk.zip and drag the firmware confirmation file (at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.

Congratulations, you have now installed the Samsung Galaxy A11 SM-A115F and the TWRP. You can now install Xposed Framework and customize your smartphone. If you want to check this, you can download the root status and check it through the Root Checker application.

Related Tags:

magisk for android 11,magisk manager,kingroot apk,kingo root,legit root tools,twrp samsung,magisk mirror apk,kingoroot apk,kingroot,samsung a11,htc desire 510 twrp,root samsung a11 xda,magisk,unlock bootloader samsung a11,root samsung a11 no pc

Filed Under: World Tech

About tuio

Recent Posts

  • Logitech Gaming Software User Guide 2021
  • Surface Pro won’t connect to the iPhone’s hotspot
  • Are you sure you want to leave this page?
  • Learn To Use Multiple Apps On Your Windows
  • The 13 Best Cell Phone Companies List in 2021
  • Windows 10 laptop battery drains very fast after update? Apply these tips
  • Best Free and paid parental control apps for iPad 2020
  • Divi by Elegant Themes Review 2020
  • How to boot Apple Mac M1 in Recovery Mode [Definitive Guide]
  • Android: Create a toggle button with image and no text –
  • PANIC: Cannot find AVD system path. Please define ANDROID_SDK_ROOT (in windows 10) –
  • How to Transfer Files Between Two Computers Using LAN Cable
  • Best Remote Cell Phone Spy Software Without Target Phone
  • Best Ways To Tackle Windows 10 Num Lock Issues With Ease
  • Python Machine Learning Third Edition: Book Review

Copyright © 2023 · GoTo11.net